ADSL, ADSL2, ADSL2+ tester with an ATU-R modem
ARGUSŪ41PLUS allows the installer to confirm that the promised ADSL service is being properly delivered to the subscriber.
Determine the ADSL Quality-of-Service automatically within seconds by receiving the connection rates and noise margins from the DSLAM at the customer.
Check through the network if the wiring does allow DSL service by connecting the battery powered ARGUS at various points at the end point, at the junction box, at the cross box - and optimise the local loop.
Argus 41 Plus - ADSL interface functions
o ATU-R simulation for ADSL, ADSL2, ADSL2+
o Standards supported: ANSI T1.413.2, ITU-T G.992.1 (G.DMT) Annex A / B, ITU-T G.992.2 (G.Lite), ITU-T G.992.3 Annex A / B / L (Reach Extended) / Appendix 1, ITU-T G.992.4 Annex A / B / Appendix 1, ITU-T G.992.5
o ADSL over POTS (Annex A) or ADSL over ISDN (Annex B) or both* in the same tester available
o Automatically measures and displays the following upstream and downstream parameters of the line:
- ATM maximum bit rates
- ATM fast or interleaved bit rates
- noise margin, output power, line attenuation
o ATM cell and bit error statistics (upstream/downstream):
- CRC (Cyclic Redundancy Check)
- FEC (Forward Error Correction)
- HEC (Header Error Checksum)
o ADSL tester with (ATU-R) modem simulation at the customer
o Measurement of the maximum ADSL data rate and the line parameters for up and downstream
o WEB Browser control and result display
o Battery operation with an internal charger
ARGUS 41 options...
o IP tests (PING/HTTP and FTP download/traceroute)
o Bridge mode incl. DHCP server
o Protocols: PPPoE, PPPoA, IP o. ATM, Ethernet o. ATM, IP, PPTP
o Configuration with ARGUS Web Browser
|
