|
The premium ARGUS tester
for all ISDN interfaces PRI, BRI and U-interface as well as POTS
interfaces. Furthermore, this top of the line, ARGUS tester also supports
passive monitoring and decoding on both BRI and PRI accesses.
The ARGUS 125 is the
premium tester for PRI, BRI, U-interface and POTS accesses as well as for
permanent circuits (leased lines)., TE and NT Simulation and Monitoring on PRI
or BRI; can save the data in its 16MB internal memory and decode to
Expert level on the LARGE screen. Additionally, BERT testing over 1-30
channels is possible together with a display of line and inter-channel
delay times; charging of the internal AA batteries whilst in use.
o MegaBERT option: The MegaBERT
option extends the functionality of an ARGUS25 tester with support for a
2Mbit bit error rate test on all timeslots simultaneously (framed or
unframed)
o V5.1/5.2 Monitor option: This option extends the
ARGUS25 functionality to include the recording and decoding of the V5
protocol.
An overview of the ARGUS 125 standard features:
* Premium tester for the most common interfaces (weight
450g including batteries)
o PRI and BRI interfaces; configurable in TE or NT mode
o Passive monitoring of a D-channel on a PRI or BRI
o U-interface and POTS interfaces in TE mode
o Voltage and signal level measurement, Layer1 Alarm /FAS/CRC
o Cabling test for BRI accesses
o Intuitive menu structure
o Operation using cursor keys, softkeys
and direct-mode keys
o Automatic test sequence (AutoTest)
with results saved
o Transfer of data to a PC, including monitoring,
tracing and test reports, over USB link
o Powered by the BRI access, battery, accumulator or
plug-in power supply
o Can recharge the accumulators in the tester when in
use
o Flash-ROM technology for software updates via a PC
|
|
