WatchiTV NMS is a centralization MPEG/Network management system which provides real-time monitoring and alarm, report functionality.
- SNMP network management system.
- Supports TCP/IP for WatchiTV MPEG configuration synchronization.
- Real-time alarm.
- Web base interface.
- Multi-authority access level control.
-
Provide period channel and network status report by Yearly, Monthly, daily.
- Stream copy and redirect for remote Content validation, Live video display
- Supports NTP for network time synchronization.
- Remote access and login to WatchiTV MPEG for drill down to detail analysis.
|
- Support MPEG-2 TS (ISO 13818-1) over IP/UDP or IP/UDP/RTP Analysis - 10/100/1000Mbps.
- Support simultaneous analysis of 64 streams per MPEG module (extendable by adding MPEG module).
- Support of maximum UDP segment size (up to 32k byte, regardless of LIFO or FIFO stack implementation).
- Transmitted as IP fragments.
- Support IP Unicast/Multicast Stream.
- Throughput analysis of services and PIDs.
- TR101 290 health check support
- Priority I
TS_sync_loss, Sync_byte_error, PAT_error, Continuity_count_error, PMT_error, PID_error
- Priority II
Transport_error, CRC_error, PCR_error, CAT_error
- Priority III
NIT_error, SI_repetition_error, Unreferenced_PID, STD_error, EIT_error, RST_error, TDT_error
- Ethernet layer information:Transport_error, CRC_error, PCR_error, CAT_error
- CRC, Alignments, Over/Undersize, IP checksum error, dribble, pause package.
- Packet Information:Transport_error, CRC_error, PCR_error, CAT_error
- Size, Fragment, broadcast/Multicast/Unicast, VLAN, SNAP, MPLS.
- Capture Trigger before & after event, 8M Bytes of data per stream
captured for further analysis.
|
| |
|
|
 |
|
 |
|
